PLUS folding seat, fixed height

EAN 5708590306339
ETIM EC003656
FDA INN/D135865
GMDN 64740
HMI 130159
NBS N13:448
NRF 7501001
RSK 7973939
UNSPSC 42192106
VVS 777531000

R5510000

R5015

Folding seats

PLUS folding seat, fixed height

The seat is suitable for situations where additional seating is required and space is limited, - e.g. in kitchens, lifts and corridors or on the landings.
The folding seat is not suitable for use in the shower area.

PLUS folding seat. For fixed mounting.
Materials: Aluminium, thermoset plastic, plastic.
Excl. mounting kit.

Excl. mounting kit. See Technical datasheet (pdf) for information on mounting kits suitable for various wall types.

White

The seat is suitable for situations where additional seating is required and space is limited, - e.g. in kitchens, lifts and corridors or on the landings.
The folding seat is not suitable for use in the shower area.
Expected service life is 10 year.

The folding seat is made out of thermoset plastic, and the mounting and suspension bracket are made from 10 my anodised aluminium. The end caps are made from ABS plastic.

Ergonomically shaped seat, which offers good and comfortable support.

The seat can be folded away when not in use, - or to free up space. Stays up of itself when folded away.

Maximum user mass: 435 kg.
When the seat is loaded with 435 kg, each wall fastener is loaded with 199 kg.

The seat has been tested statically with safety factor 1.5, which is a requirement according to the applied assistive products standards.

Fixed mounting

435 kg

435 kg

pcs

4.1 kg

4.62 kg

4.62 kg

54

1

54

PLUS folding seat.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+

NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.

CE MDR This product is in compliance with all relevant requirements of: - Regulation (EU) 2017/745 on medical devices.

Pressalit makes a commitment to remedy material and manufacturing defects for a period of five years from the invoicing date.