Lift for worktop, electrically height adjustable

EAN 5708590293776
HMI 61264

RK1081

Lifts for kitchen worktop, freestanding

Lift for worktop, electrically height adjustable

The name INDIVO relates to the individual configuration of the products.

Electric lift for freestanding worktop.
For worktops from 1400 - 2000 mm.
Height adjustable 300 mm.
Including 2 telescopic legs, longitudinal and cross braces and switch.
Pressalit recommends overhang of 200 mm at either end to allow ease of approach in wheel-chair.
Please state desired length when ordering.

INDIVO lifts may be used with most commercially available kitchen worktops and kitchen cupboards, allowing them to be adjusted in height so the kitchen can be used by both seated and standing people.
Expected service life for the INDIVO lifting units is 10 years.

Material:
Telescopic leg: Aluminium, ABS plastic
Cross braces: Aluminium
Brackets: Steel
Cable tray: ABS plastic
Switches: ABS plastic
Surface treatment:
Brackets: Powder lacquered (grey RAL 9006)

A freestanding electric Indivo solution is a flexible work or dining table, primarily intended for use in the kitchen.
The height of the worktop can be quickly and easily adjusted to the given user or situation.
A freestanding worktop can also be used in rooms in which the walls are not strong enough to support the wall-mounted models.

Lift heights are adjusted via switches set in the edge or directly under the worktop.
Operating switches can be placed anywhere.
The design of the legs and feet make the table stable and secure, and ensure the lift causes minimal inconvenience to wheelchair users.
The design of the lift makes it possible to use the worktop from all sides.
Height adjustable over a range of 300 mm.
Available for worktops of any length between 1400 mm and 3000 mm.

Maximum load (evenly distributed):
100 kg including worktop.

Height adjustable

300 mm

300 W

2 W

20 mm/s

20 mm/s

45 dB

DB4 Deskline (Linak) 1000 N, IP22

CBD6 (Linak)

pcs

20.3 kg

22.1 kg

22.1 kg

99999

1

99999

INDIVO lift for kitchen worktop.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the surface being damaged.

The following cleaning agents have been tested by Pressalit and may be used, as long as they are diluted according to the instructions on the container.

DISINFECTANTS:
Clinimax Difficil-S
Erisan OXY+

NON-DISINFECTANTS:
Suma Star free D1
Taski 100
Taski 200

The product must be wiped down with a soft rag wrung out in clear water immediately after cleaning, as some materials may otherwise be discolored and stained, and the surface coating may deteriorate.

DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other aluminum parts using a solution of three parts 30% acetic acid to seven parts tap water. When the aluminum parts have been washed down with this solution, the parts must be wiped over with a damp cloth wrung out in clear water.

Pressalit makes a commitment to remedy material and manufacturing defects for a period of three years from the invoicing date.